Representative product form. Final enclosure, connector and labeling follow the approved specification.
Custom & Industrial Packs
LiFePO4 Prismatic 3.2V105Ah Cell
Customizable battery configuration for OEM and industrial equipment. Specifications shown are a reference baseline and can be reviewed for OEM requirements.
Discuss This RequirementReference Specification
Starting point for engineering review
Final specifications, cell selection, BMS limits and compliance documents depend on the confirmed application and order requirements.
Item
Specification / Remarks
Nominal Capacity
105Ah / @0.2C discharge , 2.5V cut off
Typical Capacity
104Ah / @0.2C discharge , 2.5V cut off
Minimum Energy
332Wh / @0.2C discharge , 2.5V cut off
Nominal Voltage
3.2V /
Charge Voltage
3.65±0.02V /
Charge Mode
CC/CV /
Charge
Standard charge : 0.2C / Charge at 0.2C to 3.65V, then 3.65V (constant voltage) until the charge current is less than 0.02C cut off
Rapid charge : 1.0C
Charge at 1C charge to 3.65V, then 3.65V (constant voltage) until the charge current is less than 0.02C, cut off.
Discharge
Standard Discharge : 0.2C / Constant Current 0.2C, cut-off Voltage 2.5V
Rapid Discharge : 1.0C
Constant Current 1C, cut-off Voltage 2.5V
Max. Charge Current
1.0C / 1.0C(45℃≥T≥ 10℃) ; 0.2C(10℃≥T≥0℃)
Cont. Discharge Current
2.0C to 2.5V / 0.5C(50℃≥ T≥ 45℃) ; 2.0C(45℃≥T≥5℃) ; 0.2C(5℃≥T≥-20℃)
Max. Discharge Current
3.0C / 3.0C(45℃≥T≥5℃)
Build this platform around your equipment.
Start with a reference model or send a completely new specification.